Piping Technology System | Site-Wide Activity

Admin wrote a new post

Fri, 21 Aug 2026 03:31:53 +0000

Metric Tubing Size Chart: OD, ID & Wall Thickness Metric tubing is widely used in hydraulic, pneumatic, instrumentation, automotive, laboratory, and industrial process systems. Unlike pipe, which is often […]

Admin wrote a new post

Fri, 21 Aug 2026 02:51:24 +0000

NPTF Thread Size Chart: Dimensions, TPI & Thread Guide NPTF threads are widely used in hydraulic, pneumatic, fuel, lubrication, and general fluid-handling systems where a tapered pipe thread is required to […]

Admin wrote a new post

Fri, 21 Aug 2026 02:26:32 +0000

JIC Thread Size Chart: Dash Sizes, Threads & Dimensions JIC fittings are among the most widely used hydraulic connections in industrial machinery, mobile equipment, agricultural systems, construction equipment, […]

Admin wrote a new post

Fri, 21 Aug 2026 01:50:43 +0000

SAE Thread Size Chart: Complete SAE, JIC & ORB Thread Sizes SAE threads are widely used in automotive, hydraulic, mobile equipment, agricultural machinery, and industrial fluid systems. They are commonly found on […]

Admin wrote a new post

Fri, 21 Aug 2026 01:28:08 +0000

ORB Fitting Size Chart: Thread Sizes, Dash Sizes & Dimensions ORB fittings are widely used in hydraulic systems where a reliable, leak-resistant connection is required between a fitting and a threaded port. ORB […]

Admin wrote a new post

Fri, 21 Aug 2026 01:12:18 +0000

Pipe Wall Thickness Chart Pipe wall thickness is one of the most important dimensions used when selecting pipe for industrial piping, oil and gas, chemical processing, power […]

Admin wrote a new post

Thu, 20 Aug 2026 07:15:03 +0000

NPS to DN Conversion Chart Pipe sizes are commonly identified using two different designation systems: NPS (Nominal Pipe Size) and DN (Diameter Nominal). NPS is widely used in the […]

Admin wrote a new post

Thu, 20 Aug 2026 04:14:05 +0000

DN Pipe Size Chart: DN to NPS Conversion and Dimensions DN pipe size is a standardized system used to identify the nominal size of pipes, valves, flanges, fittings, and other piping components. The abbreviation […]

Admin wrote a new post

Tue, 18 Aug 2026 07:36:24 +0000

Tubing Bend Radius Chart: Inch & Metric Tube Sizes Tubing is widely used in hydraulic, pneumatic, instrumentation, process, automotive, and industrial piping systems. Although straight tubing is easy to […]

Admin wrote a new post

Tue, 18 Aug 2026 06:54:14 +0000

Thread Pitch Chart: Metric, UNC, UNF, BSP & NPT Thread pitch is one of the most important dimensions used to identify and select threaded fasteners, fittings, pipes, and mechanical components. Even when […]

Admin wrote a new post

Mon, 10 Aug 2026 13:53:40 +0000

BSPT Thread Size Chart: Dimensions, TPI, Pitch & Taper BSPT threads are widely used in piping, hydraulic, pneumatic, instrumentation, and industrial fluid systems around the world. The term BSPT stands for […]

Admin wrote a new post

Mon, 10 Aug 2026 13:40:30 +0000

BSPP vs BSPT Threads Size Chart : Differences & Guide BSP threads are among the most widely used pipe thread standards in hydraulic, pneumatic, plumbing, instrumentation, and industrial piping systems. The […]

Admin wrote a new post

Mon, 10 Aug 2026 08:00:34 +0000

UN Thread Size Chart: UNC, UNF, UNEF Dimensions Unified National (UN) threads are among the most widely used inch-based screw threads in engineering, manufacturing, construction, automotive equipment, […]

Admin wrote a new post

Mon, 10 Aug 2026 06:38:21 +0000

BSP Thread Size Chart: BSPP and BSPT Dimensions British Standard Pipe (BSP) threads are widely used to connect pipes, tubes, valves, hydraulic components, pneumatic equipment, and process […]

Admin wrote a new post

Wed, 05 Aug 2026 09:30:02 +0000

UNC Thread Size Chart: Dimensions, TPI & Tap Drill Sizes UNC threads are among the most widely used inch-based screw threads in mechanical, structural, automotive, agricultural, and general industrial […]

Admin wrote a new post

Wed, 05 Aug 2026 08:37:49 +0000

Metric Thread Size Chart: Dimensions, Pitch & Tap Drill Sizes Metric threads are among the most widely used fastening thread systems in industrial equipment, machinery, automobiles, piping components, construction […]

Admin wrote a new post

Mon, 03 Aug 2026 01:40:40 +0000

Tube vs Pipe: What's the Difference Between Tube and Pipe? Although the terms tube and pipe are often used interchangeably, they are designed for different purposes and follow different sizing standards. In […]

Admin wrote a new post

Wed, 17 Jun 2026 08:22:37 +0000

P&ID Line Symbols Explained: Complete Guide to Process and Signal Lines Process and Instrumentation Diagrams (P&IDs) are among the most important engineering documents used in industrial facilities such as oil and gas plants, […]

Admin wrote a new post

Thu, 11 Jun 2026 02:55:01 +0000

List of ASME Codes vs ASME Standards The American Society of Mechanical Engineers (ASME) develops some of the most widely recognized engineering codes and standards used throughout the world. […]

Admin wrote a new post

Thu, 04 Jun 2026 13:20:29 +0000

Chemical Compatibility Chart PDF : Complete Guide to Material and Chemical Resistance Selecting the correct material for handling chemicals is one of the most important aspects of engineering design. Whether designing a piping system, […]

Admin wrote a new post

Mon, 01 Jun 2026 09:06:13 +0000

API 579 Standard Pdf : Complete Guide to Fitness-For-Service (FFS) Assessment Industrial facilities such as refineries, petrochemical plants, offshore platforms, power stations, and chemical processing plants rely heavily on […]

Admin wrote a new post

Mon, 01 Jun 2026 06:41:52 +0000

API 521 Standard Pdf: Complete Guide to Pressure-Relieving and Depressuring Systems In the oil & gas, petrochemical, refining, chemical, and industrial processing sectors, operating equipment under pressure is unavoidable. Pressure […]

Admin wrote a new post

Mon, 01 Jun 2026 06:19:41 +0000

API 520 Standard Pdf: Complete Guide to Pressure Relief Valve Sizing, Selection & Installation The API 520 Standard is one of the most important engineering references for designing safe and reliable pressure relief systems in industrial facilities. […]

Admin wrote a new post

Sat, 30 May 2026 09:03:47 +0000

API 6D Standard Pdf: Pipeline Valve Requirements, Testing & Compliance Guide The API 6D Standard is one of the most important specifications used in the oil and gas industry for pipeline valves. Developed by the American Petroleum […]

Admin wrote a new post

Fri, 29 May 2026 07:55:38 +0000

API 598 Standard Pdf: Valve Inspection and Testing Guide Industrial valves are critical components used to control, isolate, and regulate the flow of fluids in piping and process systems. Whether handling oil, […]

Admin wrote a new post

Wed, 27 May 2026 15:05:33 +0000

ASME B36.10 Standard PDF : Steel Pipe Dimensions and Schedules The ASME B36.10 Standard is one of the most widely used engineering standards for steel pipe dimensions, wall thicknesses, and schedule classifications in […]

Admin wrote a new post

Wed, 27 May 2026 14:27:37 +0000

ASME B36.19 Standard: Stainless Steel Pipe Dimensions, Schedules, and Size Charts The ASME B36.19 Standard is one of the most important piping standards used for stainless steel pipe dimensions and wall thickness requirements in […]

Admin wrote a new post

Tue, 26 May 2026 02:22:29 +0000

Pressure Transmitter Symbol Chart: PT, DPT in P&ID Drawings A pressure transmitter symbol is a standardized engineering symbol used to represent a pressure transmitter in Piping and Instrumentation Diagrams […]

Admin wrote a new post

Mon, 25 May 2026 14:47:14 +0000

Control Valve Symbol Guide: How to Read Control Valve Symbols in P&ID Drawings A control valve symbol is a standardized graphical representation used in engineering drawings to identify a control valve and its associated components […]

Admin wrote a new post

Mon, 25 May 2026 14:04:12 +0000

PLC Symbols Chart: Complete Guide to PLC Electrical & Ladder Logic Symbols In modern industrial automation, PLC symbols are essential for designing, programming, operating, and troubleshooting automated systems. Whether working […]

Admin wrote a new post

Sun, 24 May 2026 10:26:42 +0000

HVAC Symbols Chart: How to Read HVAC Drawing Symbols An HVAC Symbols Chart is a visual reference guide that explains the standardized symbols used in Heating, Ventilation, and Air Conditioning (HVAC) […]

Admin wrote a new post

Sun, 24 May 2026 09:37:44 +0000

Flange Symbol in P&ID and Piping Drawings A flange symbol is a standardized graphical representation used in engineering drawings to indicate a flange connection within a piping system. In […]

Admin wrote a new post

Sat, 23 May 2026 08:10:47 +0000

Relief Valve vs Safety Valve : Key Differences, Working Principles, and Applications Pressure control is one of the most critical aspects of industrial process safety. In piping systems, pressure vessels, boilers, hydraulic equipment, and […]

Admin wrote a new post

Fri, 22 May 2026 14:49:29 +0000

NFPA 72 Standard Explained: Fire Alarm and Signaling Code Guide Fire alarm and signaling systems play a critical role in protecting lives, buildings, and industrial facilities from fire emergencies. In modern […]

Admin wrote a new post

Fri, 22 May 2026 14:18:48 +0000

NFPA 13 StandardExplained: Fire Sprinkler System Design and Installation Guide Fire protection systems are one of the most important safety features in modern buildings and industrial facilities. Among all fire protection […]

Admin wrote a new post

Mon, 18 May 2026 14:30:19 +0000

Tube Size Chart: Complete Guide to Tubing Dimensions, Standards, and Pressure Ratings A tube size chart is one of the most important references used in industrial piping, hydraulic, instrumentation, and fluid handling systems. Engineers, […]

Admin wrote a new post

Mon, 18 May 2026 14:01:33 +0000

10 Main Differences Between Tube and Pipe In industrial systems, construction projects, manufacturing plants, and fluid handling applications, the terms “tube and pipe” are often used int […]

Admin wrote a new post

Sun, 17 May 2026 09:35:36 +0000

SAE Thread Identification Chart Guide | SAE, JIC, ORB, BSP & Metric Threads In hydraulic and fluid transfer systems, thread identification is one of the most important steps for ensuring safe, leak-free, and reliable connections. […]

Admin wrote a new post

Fri, 15 May 2026 14:14:10 +0000

JIC Fitting Size Chart: Thread Dimensions, Dash Sizes & Hydraulic Fittings Guide JIC fittings are among the most widely used hydraulic and instrumentation fittings in industrial systems worldwide. From hydraulic power units and heavy […]

Admin wrote a new post

Wed, 13 May 2026 13:19:17 +0000

ORFS Fitting Size Chart – O-Ring Face Seal Size Chart ORFS fittings are widely recognized as one of the most reliable leak-free hydraulic fitting systems used in modern fluid power applications. ORFS stands […]

Admin wrote a new post

Tue, 12 May 2026 07:12:57 +0000

NPT Thread Chart: Complete Dimensions, Sizes, Standards, and Engineering Guide NPT threads are one of the most common threaded connection standards used in industrial piping systems throughout North America and many global industrial […]

Admin wrote a new post

Mon, 11 May 2026 14:44:01 +0000

Hydraulic Actuator: Types, Working Principle, Applications A hydraulic actuator is a mechanical device that converts hydraulic energy into linear or rotary motion using pressurized fluid. Hydraulic actuators are […]

Admin wrote a new post

Mon, 11 May 2026 13:55:46 +0000

Valve Actuator Types Explained: Pneumatic, Electric, Hydraulic & Smart Actuators Valve actuators are essential components in modern industrial automation systems. They provide the mechanical force needed to open, close, or regulate […]

Admin wrote a new post

Sat, 09 May 2026 09:29:05 +0000

Flange Pressure Rating Guide: ASME Classes, Pressure Charts & Flange Standards Flanges are one of the most important components in industrial piping systems, providing a reliable method for connecting pipes, valves, pumps, and other […]

Admin wrote a new post

Sat, 09 May 2026 08:52:21 +0000

Semiconductor Gas Systems Explained: Components, Safety & Gas Distribution Modern semiconductor manufacturing relies heavily on highly controlled gas delivery systems to produce advanced microchips with extremely small and […]

Admin wrote a new post

Wed, 06 May 2026 14:34:45 +0000

NPT vs BSP Pipe Threads: Dimensions, Standards, and Sealing Methods Threaded pipe connections are among the most widely used joining methods in industrial piping, plumbing, hydraulic, and instrumentation systems. From oil […]

Admin wrote a new post

Tue, 28 Apr 2026 15:02:10 +0000

Best Torque Wrench for Industrial & Mechanical Use (2026 Buying Guide) In modern engineering and piping systems, torque control is not optional—it’s critical. Every bolted joint, threaded connection, or compression fit […]

Admin wrote a new post

Wed, 25 Mar 2026 02:36:29 +0000

Steel Pipe Thickness Chart: Complete Guide to Pipe Schedules, NPS, and Wall Thickness Steel pipe thickness is one of the most critical parameters in piping design, directly influencing the strength, durability, and safety of a piping […]

Admin wrote a new post

Wed, 25 Mar 2026 02:17:52 +0000

Nut Size Chart: Complete Guide to Metric & Imperial Nut Dimensions In mechanical systems, piping installations, and industrial assemblies, nuts are one of the most fundamental fastening components used to secure bolts and […]

Admin wrote a new post

Fri, 06 Mar 2026 07:16:19 +0000

NPT and BSP Thread: Key Differences, Size Chart, Standards & Identification Guide In piping and fluid system engineering, choosing the correct thread type is not just a matter of fit — it is a matter of safety, performance, and c […]