WELCOME TO PIPING TECHNOLOGY !!!

Oxygen tank size chart & Calculating Oxygen Tank Duration

Understanding Oxygen Tank Size Chart

Oxygen therapy is a critical component of care for many patients with respiratory conditions. Understanding the various sizes of oxygen tanks is essential for healthcare providers, caregivers, and patients to ensure that the appropriate volume and type of oxygen tank is selected based on individual needs. This article provides an in-depth look at oxygen tank sizes, helping to demystify the options available and their specific uses.

What is oxygen tank size chart

An oxygen tank size chart is a reference tool that outlines the different sizes of oxygen tanks available, along with their specific dimensions, capacity, and common usage scenarios. This chart helps healthcare providers, patients, and caregivers choose the right tank based on the required oxygen flow rate, duration of use, and portability needs. Below is an example of a comprehensive oxygen tank size chart:

Tank Size Volume (Liters) Height (Inches) Diameter (Inches) Weight (Pounds) Common Usage
M2 35 5 2 0.7 Emergency/Short-term
M6 (A) 164 11 4 2.9 Portable/Ambulatory
B 200 12 4 4.5 Portable
C 248 14 4 5 Portable
D 425 17 4 6 Clinical/Short-term
E 680 26 4 8 Portable/Stationary
M 3455 36 8 55 Home/Hospital Stationary
H 7070 52 9 117 Long-term Care/Hospital

Understanding the Chart Components

  • Tank Size: The letter or code used to identify the tank.
  • Volume (Liters): The amount of oxygen the tank can hold.
  • Height (Inches): The physical height of the tank.
  • Diameter (Inches): The width of the tank.
  • Weight (Pounds): How much the tank weighs when filled.
  • Common Usage: Typical scenarios in which the tank is used.

How to Use the Oxygen Tank Size Chart

  1. Determine Oxygen Requirements: Based on the prescribed flow rate and daily usage duration.
  2. Consider Portability: Smaller tanks (M2, M6, B, C) are better for active patients who need to carry the tank around. Larger tanks (E, M, H) are suitable for stationary use at home or in medical facilities.
  3. Frequency of Refills: Larger tanks require fewer refills but are less portable. Choose a size that balances convenience and the need for frequent refills.
  4. Consult Healthcare Provider: Always discuss with a healthcare provider to ensure the selected tank meets medical needs and lifestyle requirements.

Using an oxygen tank size chart ensures patients receive the correct amount of oxygen in a convenient and practical manner, enhancing the effectiveness of oxygen therapy.

The Importance of Oxygen Tank Sizes

Oxygen tanks come in different sizes, each designed to serve varying needs. The size of an oxygen tank affects its portability, the duration of oxygen supply it can provide, and the specific applications it is best suited for. Selecting the correct size is crucial for ensuring that patients receive a continuous and adequate supply of oxygen.

Common Oxygen Tank Sizes and Specifications

Understanding Oxygen Tank Size Chart

Oxygen tanks are commonly referred to by letter codes, with each size indicating a specific volume and corresponding usage time. Here is an overview of some of the most common oxygen tank sizes:

  1. M2 Tank:
    • Volume: 35 liters
    • Height: 5 inches
    • Diameter: 2 inches
    • Weight: 0.7 pounds
    • Usage: Typically used for emergency situations or short-term needs due to its small size and portability.
  2. M6 (or A) Tank:
    • Volume: 164 liters
    • Height: 11 inches
    • Diameter: 4 inches
    • Weight: 2.9 pounds
    • Usage: Ideal for portable use, suitable for ambulatory patients.
  3. B Tank:
    • Volume: 200 liters
    • Height: 12 inches
    • Diameter: 4 inches
    • Weight: 4.5 pounds
    • Usage: Commonly used for portable oxygen therapy, provides a moderate amount of oxygen.
  4. C Tank:
    • Volume: 248 liters
    • Height: 14 inches
    • Diameter: 4 inches
    • Weight: 5 pounds
    • Usage: Suitable for portable use, offers a balance between size and capacity.
  5. D Tank:
    • Volume: 425 liters
    • Height: 17 inches
    • Diameter: 4 inches
    • Weight: 6 pounds
    • Usage: Often used in clinical settings or for patients requiring a higher flow rate over a short period.
  6. E Tank:
    • Volume: 680 liters
    • Height: 26 inches
    • Diameter: 4 inches
    • Weight: 8 pounds
    • Usage: Common for both stationary and portable use, offers a significant amount of oxygen.
  7. M Tank:
    • Volume: 3455 liters
    • Height: 36 inches
    • Diameter: 8 inches
    • Weight: 55 pounds
    • Usage: Typically used in stationary setups at home or in hospitals due to its large capacity.
  8. H Tank:
    • Volume: 7070 liters
    • Height: 52 inches
    • Diameter: 9 inches
    • Weight: 117 pounds
    • Usage: Primarily used in hospitals or long-term care facilities, provides an extensive supply of oxygen.

Selecting the Right Oxygen Tank Size

Choosing the appropriate oxygen tank size depends on several factors, including the patient’s oxygen requirements, lifestyle, and the duration for which the oxygen supply is needed. Healthcare providers typically recommend tank sizes based on the following considerations:

  • Flow Rate: The prescribed flow rate (liters per minute) affects how quickly the tank will be depleted.
  • Duration: How long the patient needs the oxygen supply (e.g., hours per day).
  • Portability: Whether the patient needs a portable tank for mobility or a larger tank for stationary use.
  • Frequency of Refills: Larger tanks require less frequent refills, making them more suitable for home use, while smaller tanks are easier to transport but need more frequent refilling.

Understanding the various sizes of oxygen tanks is essential for optimizing oxygen therapy. By selecting the appropriate tank size, patients can ensure they have a reliable supply of oxygen tailored to their specific needs, enhancing their quality of life and overall health. Always consult with a healthcare professional to determine the best oxygen tank size for your situation.

Oxygen tank size chart in medical

An oxygen tank size chart in the medical field provides a detailed reference for the various sizes of oxygen cylinders, their dimensions, capacity, and typical usage scenarios. This chart helps healthcare providers and patients select the appropriate tank for specific medical needs. Here’s a comprehensive chart:

Tank Size Capacity (Liters) Height (Inches) Diameter (Inches) Weight (Pounds) Common Usage
M2 35 5 2 0.7 Emergency, short-term use
M6 (A) 164 11 4 2.9 Portable, ambulatory patients
B 200 12 4 4.5 Portable use
C 248 14 4 5 Portable use
D 425 17 4 6 Clinical settings, higher flow rates
E 680 26 4 8 Stationary or portable use
M 3455 36 8 55 Stationary use at home or hospital
H 7070 52 9 117 Long-term care, hospital use

Explanation of Chart Components

  • Tank Size: Designation of the tank (e.g., M2, M6, etc.).
  • Capacity (Liters): The volume of oxygen the tank can hold.
  • Height (Inches): The height of the tank.
  • Diameter (Inches): The width of the tank.
  • Weight (Pounds): The weight of the tank when filled.
  • Common Usage: Typical scenarios for which the tank is used.

How to Use the Chart

  1. Determine Oxygen Needs: Assess the patient’s oxygen flow rate and daily usage.
  2. Evaluate Portability: Choose smaller tanks (M2, M6, B, C) for mobility and larger tanks (E, M, H) for stationary use.
  3. Refill Frequency: Larger tanks provide more oxygen and require fewer refills, suitable for home or hospital settings.
  4. Consult with Healthcare Providers: Ensure the selected tank size aligns with medical requirements and patient lifestyle.

Using this chart can help make informed decisions for effective and convenient oxygen therapy.

How long does a size oxygen tank last?

The duration an oxygen tank lasts depends on the tank’s capacity, the flow rate of the oxygen, and the patient’s usage. Here’s a general guide on how long various sizes of oxygen tanks last at different flow rates.

Calculating Oxygen Tank Duration

To calculate how long an oxygen tank will last, you can use the following formula:

Here’s a breakdown for common tank sizes at different flow rates:

Duration of Common Oxygen Tank Sizes

At 1 Liter Per Minute (LPM)

Tank Size Capacity (Liters) Duration (Hours)
M2 35 0.58 (34.58 minutes)
M6 (A) 164 2.73
B 200 3.33
C 248 4.13
D 425 7.08
E 680 11.33
M 3455 57.58
H 7070 117.83

At 2 Liters Per Minute (LPM)

Tank Size Capacity (Liters) Duration (Hours)
M2 35 0.29 (17.29 minutes)
M6 (A) 164 1.36
B 200 1.67
C 248 2.07
D 425 3.54
E 680 5.67
M 3455 28.79
H 7070 58.91

At 3 Liters Per Minute (LPM)

Tank Size Capacity (Liters) Duration (Hours)
M2 35 0.19 (11.53 minutes)
M6 (A) 164 0.91
B 200 1.11
C 248 1.38
D 425 2.36
E 680 3.78
M 3455 19.19
H 7070 39.28

Key Considerations

  • Flow Rate: The higher the flow rate, the shorter the tank will last.
  • Tank Size: Larger tanks hold more oxygen and last longer.
  • Usage: Continuous flow uses more oxygen than pulse flow (used with oxygen conservers).

Example Calculation

For a D tank (425 liters) with a flow rate of 2 liters per minute:

Calculating Oxygen Tank Duration

Always consult with a healthcare provider to determine the appropriate tank size and flow rate for individual needs. This guide provides a general overview and may vary based on specific conditions and usage patterns.

Overview of Nitrogen Tanks and Nitrogen Tank Sizes

Related posts
Stainless Steel MM Tubing Sizes Chart
Stainless Steel MM Tubing Sizes Chart

Contents1 I. Understanding Tubing Dimensions1.0.1 1. Outer Diameter (OD)1.0.2 2. Inner Diameter (ID)1.0.3 3. Wall Thickness1.0.4 4. Standards for Tubing Dimensions2 II. Common Stainless Steel MM Tubing Sizes2.0.1 1. Small-Diameter Tubes (Up to 25 mm OD)2.0.2 2. Medium-Diameter Tubes (25 mm to 50 mm OD)2.0.3 3. Large-Diameter Tubes (Over 50 mm OD)2.0.4 4. Wall Thickness3 […]

Read more
Piping & Instrumentation Diagram (P&ID) Guide : How To Read a Piping & Instrumentation Diagram
Piping & Instrumentation Diagram (P&ID) Guide : How To Read a Piping & Instrumentation Diagram

Contents1 I. What is a Piping & Instrumentation Diagram (P&ID)?1.0.1 Explanation of Piping & Instrumentation Diagram (P&ID) and Their Importance in the Process Industry1.1 Functions and Importance of Piping & Instrumentation Diagram1.1.1 Importance in Design, Operation, and Maintenance1.2 Piping & Instrumentation Diagram (P&ID) Standardization2 II. Components of Piping & Instrumentation Diagram (P&ID)2.0.1 1. Piping2.0.2 2. […]

Read more
The Essential Guide to Instrumentation Design and Standards
The Essential Guide to Instrumentation Design and Standards

Contents0.1 The Essential Guide to Instrumentation Design and Standards0.2 1 1. Understanding Instrumentation Design1.1 Definition and Scope of Instrumentation Design1.2 Key Components of Instrumentation Systems1.3 Applications of Instrumentation in Various Industries2 2. The Role of Standards in Instrumentation2.1 Definition and Purpose of Standards2.1.1 Benefits of Adhering to Standards2.1.2 Key Organizations Setting Instrumentation Standards3 3. Key […]

Read more
The List of International ASTM Standards for All Industries
The List of International ASTM Standards for All Industries

Contents1 Comprehensive Guide to ASTM Standards2 1. What are ASTM Standards?2.1 How many standards does ASTM have?3 2. The List of International ASTM Standards for All Industries3.1 ASTM Standards for Piping3.2 Additional Notes4 The Process of Developing and Revising ASTM Standards5 Benefits of Using ASTM Standards5.1 1. Quality Assurance5.2 2. Safety Enhancement5.3 3. Efficiency Improvement5.4 […]

Read more
Safety Instrumented System (SIS) : A Comprehensive Guide
Safety Instrumented System (SIS) : A Comprehensive Guide

Contents1 2 I. Importance of safety Instrumented System in Industrial Safety3 II. Historical Context and Evolution of Safety Instrumented System3.1 Early Safety Systems in Industrial Processes3.2 The Evolution of Safety Instrumented System Technology3.3 Key Milestones in Safety Instrumented System Development4 III. Safety Requirements for Instrumentation System4.1 1. Adherence to Standards and Regulations4.2 2. Risk Assessment […]

Read more
Copper piping size chart
Copper piping size chart

Contents1 Copper piping size chart1.1 Example of Common Copper Pipe Sizes:1.2 Table of copper piping size chart from size 1/18 in to 5 in2 3 What is copper tubing/piping?4 Copper piping and tubing specifications4.1 1. ASTM Standards4.2 2. Dimensions4.3 3. Material Grades4.4 4. Pressure Ratings4.5 5. Temper4.6 6. Applications5 Working pressure of Standard Copper Tube5.1 […]

Read more
Check valve symbol
Check valve symbol

Contents1 1. Introduction1.0.1 Definition of Check Valves1.0.2 Importance of Check Valves in Various Industries2  2. Basic Principles of Check Valves3 3. Symbolism in Engineering and Schematics4 4. Check Valve Symbols: An Overview4.1 Common Check Valve Symbols4.2 Differences Between Symbols for Different Types of Check Valves4.2.1 Understanding the Symbols in Different Engineering Drawings4.3 Section 5: Detailed […]

Read more
API 1169 standard pdf
API 1169 standard pdf

Contents1 I. Introduction API 1169 standard1.1 II. Background and Development of API 11691.1.1 Historical Context1.1.2 Industry Collaboration and Stakeholder Involvement1.1.3 Objectives of API 11691.1.4 Evolution of the Standard1.1.5 Integration with Global Standards2 III. Key Components of API 1169 Standard2.0.1 1. General Pipeline Construction Practices2.0.2 2. Safety2.0.3 3. Environmental and Regulatory Compliance2.0.4 4. Inspection Practices and […]

Read more
Check valve pressure drop calculation formula
Check valve pressure drop calculation formula

Contents1 What is check valve pressure drop ?2 Check valve pressure drop calculation formula3 What is the typical pressure drop for a check valve?4 How to prevent check valve pressure drop5 Check valve pressure drop chart What is check valve pressure drop ? The pressure drop across a check valve refers to the decrease in […]

Read more
SUS 304 Stainless Steel : A comprehensive overview
SUS 304 Stainless Steel : A comprehensive overview

Contents1 Introduction to SUS 304 Stainless Steel1.0.1 Historical Background1.0.2 Common Uses2 Composition and Properties of SUS 304 Stainless Steel2.1 Chemical Composition2.2 Physical and Mechanical Properties2.3 Comparison with Other Stainless Steel Grades3 Manufacturing Process of SUS 304 Stainless Steel3.1 Melting and Casting3.2 Forming and Shaping3.3 Heat Treatment3.4 Finishing Processes4 Applications of SUS 304 Stainless Steel4.1 Culinary […]

Read more